5 Commons Ways to Maintain Your Pressure Washer at Home
All you need to do is pull that pressure washer out of the container, clean off the best you can, remove the air filter, wash that out, let that dry well, and pull the spark plug out.
CLEANING OR CHANGING THE SPARK PLUG
The first thing you need to do for a safety maintenance job is shut off the gas and disconnect the spark plug wire from the spark plug.
This will prevent the engine from accidentally starting while you work. Then, you remove the old spark plug and inspect it. A worn or fouled spark plug could be a reason for some problems when your pressure washer running.
You can clean the spark plug threads in the engine cylinder head using a wire brush or tap.
In case, it's too old or damaged, you should change to the new one for perfect work performance. On the market today, we can easily buy spark plugs at affordable price.
CHANGE AND FLUSH THE OIL
This is something you need to pay special attention to and perform at the right frequency to increase the life of your pressure washer. In general, this job is quite simple, you just drain all the old oil and change them to a new oil bottle.
PRO-TIP: Note the oil change date to determine when it needs to be changed next time.
Usually one year we use them in the summer and then store them in the warehouse. So before stopping operation for a long time, you should change the oil for them.
AIR FILTER CLEANING
You can easily find where the air filter is located on your pressure washer. Usually, they are designed to be easily removed rather than tightened with screws.
After opening them, you can assess their condition if they should be replaced. If the case is still usable, wash them with a cleaning solution, maybe a little dishwashing liquid available in your home. After drying, add some oil to it and then we're gonna ensure that this prevents debris from getting into the engine.
LUBRICATE MOVING PARTS
Apply some grease to the moving metal parts inside like the pistons and pump shafts. This will protect them from corrosion and wear, help parts slide by each other more easily, and extend the life of your pressure washer. People usually forget this step and think it isn't necessary, but for us, this step is very important and we have put it in here to note you
Put a thin layer of grease on valves, pump fittings, and any other rotating or sliding parts to keep them working smoothly.
STORE PROPERLY
Select suitable areas with low humidity and suitable temperature. Before a long hibernation, you should make sure that there is no water left in the faucet and water tank, replace the oil because they will degrade if long. Select several suitable cleaning solutions to clean the pump.
