Prepare Before Use
Before you start cleaning, it's important to do some preparation to ensure you can use your pressure washer safely and effectively. But the first one, you have to own the best Sun Joe pressure washer and check what model is it. Each Sun Joe model has different components which are used in other ways.
Choose the Correct Nozzle
Your pressure washer came with a variety of nozzle tips that vary in spray pattern and pressure. Make sure to select the proper nozzle for the job. For example, use the 0-degree nozzle for tough grease or mold stains, and the 15-degree nozzle for general cleaning of surfaces.
To know clearly which nozzle tips should be chosen for your cleaning task, you can refer to the article about choosing the right nozzles below:
Connect the Water Supply
You'll need to hook up a water source to the pressure washer. The best option is to connect a garden hose to the water inlet using a washer hose connector. Make sure to use a hose rated for pressure washing that is at least 5/8 inches wide so it doesn't restrict the water flow.
Add Cleaning Solution
For best cleaning results, use a Sun Joe cleaning solution or all-purpose degreaser in the soap applicator on the pressure washer wand. Always use a biodegradable soap when pressure washing, and don't overfill the tank.
Wear Protective Gear
Pressure washing can create hazards if not done safely. Be sure to wear closed-toe shoes, goggles, gloves, long pants, and a long-sleeved shirt to protect yourself. Consider also wearing a rain suit or apron for extra protection from spray.
Usage Sun Joe Pressure Washer
1. Adjusting the Pressure and Spray
On the pressure washer unit, use the controls to set the ideal water pressure and spray pattern for the task. For example, adjust the PSI to 1500-2000 for tougher dirt but lower for more delicate surfaces. Select a fan spray pattern for general washing and a 0-degree nozzle for stubborn stains.
2. Adding Soap
Before you start washing, add a small amount of Sun Joe's cleaning solution or an all-purpose degreaser into the soap dispenser tank on the wand. Only use biodegradable soaps suitable for pressure washing.
3. Pressure Washing
Stand around 1-2 feet away from the surface and sweep the wand from side to side, working in small sections. Let the high-pressure water do the work for you. For more delicate surfaces, you may need to reduce the water pressure. Rinse after cleaning each area and wipe down with a clean cloth or brush.
Notes When Using Sun Joe Pressure Washer
Start with low pressure and high volume when cleaning delicate surfaces like wood or car paint. Gradually increase if needed.
Work in small sections and rinse away debris immediately so it doesn't cause damage or scratching.
Use quick sweeping motions from the bottom up and overlap passes to ensure full coverage.
Wear protective gear at all times when operating or in the vicinity of the pressure washer.
Disconnect power and water supply when not in use and store upright in a dry place.
Conclusion
I hope this guide has provided you with all the necessary information to safely and properly operate your best Sun Joe pressure washer. With the right techniques, a pressure washer should make light work of even heavy-duty cleaning tasks and help keep your outdoor areas looking their best. Now get out there and start blasting away those stubborn stains!
